CONTACT US

NAME

PHONE

EMAIL

MESSAGE

We won't share your info with third parties.

Hydraulic Electrical Mooring Winch

Marine Powerful Hydraulic Automatic Towing Winch

Contact Us


Product description:

Mooring winches secure the shipboard end of mooring lines, provide for adjustment of the mooring line length and compensate for changes in draft and tide. General requirements for shipboard mooring winches are dealt within ISO Standards 3730 and 7825.

Winches can be categorised by their control type (automatic or manual tensioning), drive type (steam, hydraulic or electric), by the number of drums associated with each drive, by the type of drums (split, undivided) and by their brake type and brake application (band, disc, mechanical screw, spring applied).

Automatic tension mooring winch, self-tension winch Winches designed to heave-in automatically whenever the line tension falls below a certain pre-set value. Likewise, they pay out if the line tension exceeds a pre-set value. The use of the self-tension winches is not recommended except for mooring deployed at 90° to the ship axis.

- Manual tension mooring winch  – Manual winch always requires a person to handle the controls for heaving or rendering.

- Non-split drum mooring winch  – The undivided drum winches are commonly found on smaller ships. It is often difficult to spool and stow the wire on such a drum satisfactorily; when wires are handled directly off the drum, the final turns of the outer layer when under tension tend to bite into the lower layer. This could result in possible wire damage and difficulties when releasing the line. To reduce this problem, the winch with non-split drum should be placed at a sufficient distance from the fairlead to ensure that the wire can be properly spooled.

Split drum mooring winch  – A winch with a drum divided by a notched flange into a tension section and a line storage section.

 

General Arrangement:

序号
serial number
规格及名称
Specification and the name
图号
Drawing number
工作负债KN
Working load
公称系缆速度m/min
Nominal mooring speed
绳容量mm×m
Rope capacity
电动机功率KW
Motor power
140kN手动系缆绞车2129JJs-1-00401.528×200
212kN升降绞车245SC549-001210.518×2006/2.5
320kN超货绞车245SC550-00209.515×2003.7
42×30kN仓口盖绞车2521WSS1-002+30520.5×20011
530kN绞车245JJs30-0030920.5×2007.5
650kN电动系缆绞车V2129CS7-00505/4828×457.5
750kN电动系缆绞车V2129CS10-00505/4828×457.5
850kN×10m/min吊起落架绞车V245SC518-00509.7824×20011/11/7.5
92×40kN绞车V245JJs-4-02+40521.5×20011
1050kN移船绞车245LDD50D2-0050928×20016/16/11
1150kN双卷筒绞车V226CS108-005012(第三层)/1828×16016/16/11
12电动起货绞车245LD80-008012/10/928×200
1380kn×15m/min吊起落架绞车245SC605-00801028×25030/30/22
1480kn×15m/min移船绞车245SC553-0080第三层28×30030/30/22
1580kn×15m/min吊锤绞车245SC554-00801512030/30/22
16100kn 拖绳绞车245SC551-0010092×20030/30/22
17120kn 拖绳绞车245SC605-001201018×20030/30/22
18回转吊机224SC1420826×200
1915KN绞缆机253CS2-001515
6/2.5
2015KN起货绞车227Q45-1151637.5×2008.5/3.5
2150KN液压绞车223JJS15-00500-1541×200
2244 电动起毛绞车V245CS19A-0092944.5×20030/30/22
23160KN 电动绞车245JJs80-001609-1447-52×20045/45/30-60/60/45
24200KN 电动绞车245JJ160-002009-1452×20060/60/46-75/75/60
25250KN 电动绞车245JJ200-002509
75/75/60
26320KN 电动(液压)绞车245JJ250-003207.5(8)
60/60/45(90)
27400KN 电动(液压)绞车
4007.5(8)

28500KN绞车系列245LDY500-00500≥12
225KW
29600KN绞车系列245LDY600-00600≥12
270KW
30700KN绞车系列245LDY700-00700≥12
315KW
31800KN绞车系列245LDY800-00800≥12
360KW
32900KN绞车系列245LDY900-00900≥12
400KW
331000KN绞车系列245LDY1000-001000≥12
450KW
341200KN绞车系列245LDY1200-001200≥12
540KW
351400KN绞车系列245LDY1400-001400≥12
630KW
361500KN绞车系列245LDY1500-001500≥12
675KW
371800KN绞车系列245LDY1800-001800≥12
810KW
382000KN绞车系列245LDY2000-002000≥12
900KW


Processing at OUCO workshop:

workshop show_副本.jpg


OUCO Certifications:

证书_副本2_副本.jpg

We pay 100% attention to the packing before shipment:

发货组图.png



YOU CAN CONTACT US IMMEDIATELY

Search Results For: