• Product description:

    Mooring winches secure the shipboard end of mooring lines, provide for adjustment of the mooring line length and compensate for changes in draft and tide. General requirements for shipboard mooring winches are dealt within ISO Standards 3730 and 7825.

    Winches can be categorised by their control type (automatic or manual tensioning), drive type (steam, hydraulic or electric), by the number of drums associated with each drive, by the type of drums (split, undivided) and by their brake type and brake application (band, disc, mechanical screw, spring applied).

    Automatic tension mooring winch, self-tension winch  Winches designed to heave-in automatically whenever the line tension falls below a certain pre-set value. Likewise, they pay out if the line tension exceeds a pre-set value. The use of the self-tension winches is not recommended except for mooring deployed at 90° to the ship axis.

    - Manual tension mooring winch  – Manual winch always requires a person to handle the controls for heaving or rendering.

    - Non-split drum mooring winch  – The undivided drum winches are commonly found on smaller ships. It is often difficult to spool and stow the wire on such a drum satisfactorily; when wires are handled directly off the drum, the final turns of the outer layer when under tension tend to bite into the lower layer. This could result in possible wire damage and difficulties when releasing the line. To reduce this problem, the winch with non-split drum should be placed at a sufficient distance from the fairlead to ensure that the wire can be properly spooled.

    Split drum mooring winch  – A winch with a drum divided by a notched flange into a tension section and a line storage section.

     

    General Arrangement:

    序号

    规格及名称

    图号

    工作负债KN

    公称系缆速度m/min

    绳容量mm×m

    电动机功率KW

    serial number

    Specification and the name

    Drawing number

    Working load

    Nominal mooring speed

    Rope capacity

    Motor power

    1

    40kN手动系缆绞车

    2129JJs-1-00

    40

    1.5

    28×200


    2

    12kN升降绞车

    245SC549-00

    12

    10.5

    18×200

    6/2.5

    3

    20kN超货绞车

    245SC550-00

    20

    9.5

    15×200

    3.7

    4

    2×30kN仓口盖绞车

    2521WSS1-00

    2+30

    5

    20.5×200

    11

    5

    30kN绞车

    245JJs30-00

    30

    9

    20.5×200

    7.5

    6

    50kN电动系缆绞车

    V2129CS7-00

    50

    5/48

    28×45

    7.5

    7

    50kN电动系缆绞车

    V2129CS10-00

    50

    5/48

    28×45

    7.5

    8

    50kN×10m/min吊起落架绞车

    V245SC518-00

    50

    9.78

    24×200

    11/11/7.5

    9

    2×40kN绞车

    V245JJs-4-0

    2+40

    5

    21.5×200

    11

    10

    50kN移船绞车

    245LDD50D2-00

    50

    9

    28×200

    16/16/11

    11

    50kN双卷筒绞车

    V226CS108-00

    50

    12(第三层)/18

    28×160

    16/16/11

    12

    电动起货绞车

    245LD80-00

    80

    2012/10/9

    28×200


    13

    80kn×15m/min吊起落架绞车

    245SC605-00

    80

    10

    28×250

    30/30/22

    14

    80kn×15m/min移船绞车

    245SC553-00

    80

    第三层

    28×300

    30/30/22

    15

    80kn×15m/min吊锤绞车

    245SC554-00

    80

    15

    120

    30/30/22

    16

    100kn 拖绳绞车

    245SC551-00

    100

    9

    2×200

    30/30/22

    17

    120kn 拖绳绞车

    245SC605-00

    120

    10

    18×200

    30/30/22

    18

    回转吊机

    224SC14

    20

    8

    26×200


    19

    15KN绞缆机

    253CS2-00

    15

    15


    6/2.5

    20

    15KN起货绞车

    227Q45-1

    15

    16

    37.5×200

    8.5/3.5

    21

    50KN液压绞车

    223JJS15-00

    50

    0-15

    41×200


    22

    44 电动起毛绞车

    V245CS19A-00

    92

    9

    44.5×200

    30/30/22

    23

    160KN 电动绞车

    245JJs80-00

    160

    914

    47-52×200

    45/45/30-60/60/45

    24

    200KN 电动绞车

    245JJ160-00

    200

    914

    52×200

    60/60/46-75/75/60

    25

    250KN 电动绞车

    245JJ200-00

    250

    9


    75/75/60

    26

    320KN 电动(液压)绞车

    245JJ250-00

    320

    7.5(8)


    60/60/45(90)

    27

    400KN 电动(液压)绞车


    400

    7.5(8)



    28

    500KN绞车系列

    245LDY500-00

    500

    ≥12


    225KW

    29

    600KN绞车系列

    245LDY600-00

    600

    ≥12


    270KW

    30

    700KN绞车系列

    245LDY700-00

    700

    ≥12


    315KW

    31

    800KN绞车系列

    245LDY800-00

    800

    ≥12


    360KW

    32

    900KN绞车系列

    245LDY900-00

    900

    ≥12


    400KW

    33

    1000KN绞车系列

    245LDY1000-00

    1000

    ≥12


    450KW

    34

    1200KN绞车系列

    245LDY1200-00

    1200

    ≥12


    540KW

    35

    1400KN绞车系列

    245LDY1400-00

    1400

    ≥12


    630KW

    36

    1500KN绞车系列

    245LDY1500-00

    1500

    ≥12


    675KW

    37

    1800KN绞车系列

    245LDY1800-00

    1800

    ≥12


    810KW

    38

    2000KN绞车系列

    245LDY2000-00

    2000

    ≥12


    900KW

    Processing at OUCO workshop:

    OUCO Certifications:

    We pay 100% attention to the packing before shipment:



Next:No More

Product Detail

share to:

Related Products

Leave a message

Marine Powerful Hydraulic Automatic Towing Winch
Marine Mooring Winch on Ship Deck